ESD5V5U5ULC E6327

ESD5V5U5ULC Ultra-low capacitance ESD / transient / surge protection array TVS (transient voltage suppressor) 5.5 V, 0.45 pF, RoHS compliant Feature list • • • • • • ESD/transient protection of high speed data lines exceeding: - IEC61000-4-2 (ESD): ±25 kV (air/contact) - IEC61000-4-4 (EFT): ±2.5 kV/±50 A (5/50 ns) - IEC61000-4-5 (Surge): ±6 A (8/20 μs) Maximum working voltage: VRWM = 5.5 V Extremely low capacitance: CL = 0.45 pF I/O to GND (typical) Very low dynamic resistance: RDYN = 0.2 Ω (typical) I/O to GND Very low reverse clamping voltage: VCL = 9 V (typical) at IPP = 16 A Protection of VBUS with one line freely selectable Potential applications • • • Protection of all I/O and VBUS lines in dual USB2.0 ports 10/100/1000 Ethernet DVI, HDMI, FireWire Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22 Device information Figure 1 Pin configuration and schematic diagram Table 1 Part information Type Package Configuration Marking code ESD5V5U5ULC PG-SC74-6-2 5 lines, uni-directional 20 Datasheet www.infineon.com Please read the Important Notice and Warnings at the end of this document Revision 1.5 2018-06-12 ESD5V5U5ULC Ultra-low capacitance ESD / transient / surge protection array Table of contents Table of contents Feature list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Device information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Typical characteristic diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 5.1 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PG-SC74-6-2 package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Datasheet 2 Revision 1.5 2018-06-12 ESD5V5U5ULC Ultra-low capacitance ESD / transient / surge protection array Maximum ratings 1 Maximum ratings Note: TA = 25 °C, unless otherwise specified. Table 2 Maximum ratings Parameter Symbol Values Unit Note or test condition ESD contact discharge 1) VESD ±25 kV – Peak pulse current 2) IPP ±6 A tp = 8/20 µs Operating temperature range TOP -40 to 125 °C – Storage temperature Tstg -65 to 150 °C – Attention: Stresses above the maximum values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings. Exceeding only one of these values may cause irreversible damage to the component. 1 2 VESD according to IEC61000-4-2 IPP according to IEC61000-4-5 Datasheet 3 Revision 1.5 2018-06-12 ESD5V5U5ULC Ultra-low capacitance ESD / transient / surge protection array Electrical characteristics 2 Electrical characteristics Note: TA = 25 °C, unless otherwise specified. IF IPP ITLP VF ... Forward voltage IF ... Forward current VR ... Reverse voltage IR ... Reverse current RDYN ΔV ΔI ΔI ΔV VRC VTLP Vt1 Vh VRWM VR ΔI ΔV RDYN ΔV ΔI IPP ITLP RDYN VRWM Vt1 Vh VFC VRC VTLP IRWM IPP ITLP IR Figure 2 Definitions of electrical characteristics Table 3 DC characteristics Parameter Symbol Values Min. Reverse working voltage Reverse current Datasheet VF IRWM V FC VTLP Typ. ... ... ... ... ... ... ... ... ... ... Dynamic resistance Reverse working voltage max. Trigger voltage Holding voltage Forward clamping voltage Reverse clamping voltage TLP voltage Reverse working current max. Peak pulse current TLP current Diode_Characteristic_Curve_with_snapback_Uni-directional.svg Unit Note or test condition Max. VRWM – – 5.5 V I/O to GND IR –